Sigma Products > Maren ProPak A160 Auto Tie Baler

Maren ProPak A160 Auto Tie Baler

Take the guesswork out of your baling operation with Maren’s ProPAK60 Full Eject Balers with exclusive Smart Bale Technology. Color touch screen alerts the operator when it is time to tie off the bale and leads them through the bale completion, tie and eject steps as well as how many bale ties to use and the proper position for the ties. Each material recipe has unique bale tie count and placement parameters that only need to be put in once…. it’s nothing less than the smartest of its class! With Full Eject, the chamber is cleared after each bale is made, so switching to another material does not require shutting down, cleaning out or making unwanted contaminated bales from the previous material. Largest Hopper Opening of its Class Highest Ram Face Pressure of its Class Most Durable Baler of its Class Exclusive Smart Bale Technology

Maren ProPak A160 Auto Tie Baler Specifications

Touch Screen Operator Interface

  • 10.4″ Allen-Bradley Panelview.

  • Displays the baler’s current status and indicates bale percentage complete with graphic progress bar.

  • Allows selection of saved material settings controlling bale length, photo eye options, etc.

  • Dual motor models when equipped, allow the operator to select either motor/pump A or B to operate, or allow automatic on demand activation of second motor.

  • Displays and stores machine faults, E-stop status and allows service personnel to display a fault message history log.

  • Optional conveyor controls allow operator to select upper or lower photo eye activation, run, jog, stop, conveyor auto stop delay and more.

  • Password protection allows operators to access run time features while blocking
    Feed Opening – Width 27.5″
    Feed Opening – Length 30″ or 40″
    Feed Opening – Depth 40″
    Main Cylinder 7″
    Operating Pressure 4200 PSI
    Ram Force 161,635 lbs
    Baling Force 134.7 PSI
    Horsepower Options Single 20/30, Twin 20/30
    No Load Cycle Time 7.7 secs to 16 secs
    No Load Displacement Up to 18,700 cf/hr
    Bale Size 30 x 40 x Variable Length
    Typical Bale Density OCC up to – 30#/cf

    A160 Model Includes:

    Oil Cooling: Closed loop air oil cooler w/ independent circulation pump
    PLC: Allen-Bradley Micrologix
    HMI: 10.4″ Allen-Bradley Panelview
    Floor Liners: AR400 replaceable floor liners
    Optional: Full tank of oil shipped with baler Bale wire run out sensor additional 5′ or 10′ Heavy Duty Bale Slide can be added
    service only adjustments for authorized maintenance.

Maren ProPak A160 Auto Tie Baler Features

  • A” Frame single cylinder tension chamber takes advantage of maximum ram force during full pressure baling.

  • Bale sizes 30″ x 40″ x variable length, with weights up to 1750 lbs.

  • Hopper sizes to adapt with any air conveying system

  • Advanced automatic 5-wire bale tier with electrically driven inserter and twister.

  • Optional 1000# bulk wire feed system.

  • Optional easy lifting electric hoist wire loading boom.

  • Advanced progressive shear blade design with 30″ penetration reduces shear jams and utilizes maximum ram pressure for compaction. Maren shear blade is a
    replaceable double edge design made of hardened and ground tool steel.

  • Interlocking baler chassis and ram is constructed of high strength plate steel, significantly increasing the strength of welded joints.

  • High strength steel plate floor is further reinforced with a replaceable AR400 abrasion resistant wear plate for ultimate durability, and virtually limitless service
    life.

  • Sealed tight and serviceable, the main ram is guided and sealed on bottom and sides by long wearing NylOil wear plates. The top of the ram is sealed tight
    with a spring loaded AR400 scraper. This provides unparalleled sealing and prevention of material migration behind the ram.

  • Chassis service door for easy access ahead and behind main ram. Door is electronically interlocked and can be padlocked to provide secure access only by maintenance personnel.

  • Maren’s exclusive key lock main cylinder mount removes main cylinder tension from bolts while allowing easy services and maximum cylinder mount durability.

Maren ProPak A160 Auto Tie Baler Photos

From Stretch Wrappers to Carton Sealers, Sigma Supply has the equipment, installation, maintenance and training to maximize the efficiency and profitability of your packaging operation.

Give us a call (800) 264-1661 for friendly, expert help designing your equipment solution.

Equipment Service

Our technical services group of factory-trained technicians is prepared to offer the highest level of support in the industry, including new installations, providing and installing replacement parts, training, and preventive maintenance. We pride ourselves on our level of service and will respond quickly and professionally.

Contact us for more information about our service programs and to learn if same-day service is available in your area.

Contact Us

Replacement Parts

Looking for a replacement part for your packaging equipment? SSNA is your source for replacement parts for all manner of packaging equipment, as well as installation, service and repair. Our technicians are happy to assist sourcing and pricing the parts you need as well as quoting for professional installation.

Contact us today for more information about replacement parts and installation options in your area.

Contact Us